Bus bar Processing Machine BP303
Multifunctional busbar processing machine is the patented product independently developed by our company. Compared with traditional busbar processing equipment, the product has the following advantages and characteristics:
Circular integral structure adopted by punching/shearing unit is novel and unique in design, reasonable in stress and capable of effectively ensuring long-term use without deformation;
-Bending unit adopting manual control mode is simple to operate;
-The machine adopts a design scheme of double-layer worktable.
-The machine equipped with automatic oil feeding-draining system is simple and convenient to operate; hydraulic oil passes through filter and then enters oil tank, which can ensure the whole hydraulic system free from pollution;
-The machine adopts the stainless steel oil tank capable of ensuring no corrosive deterioration of hydraulic oil and prolonging the service life of hydraulic oil and sealing elements;
-Dies are extremely convenient to draw and replace;
-Stable reliable PLC control.
Machine Configuration
Worktable Dimension (mm) |
Machine Weight |
Number of Motors |
Total Motor Power |
Working Voltage |
Number and Specifications of Hydraulic Stations |
Control Mode |
Layer 1: 1,000*1,200 |
1,060 |
2 |
4.37 |
380 |
1*31.5 |
PLC+numerical control over bending angle |
Layer 2: 840*370 |
Main Technical Parameters
Item |
Material |
Processing Thickness*Width |
Maximum Punching |
Maximum Output |
Punching Unit |
copper/aluminum |
thickness: 15mm |
25 |
350KN |
Shearing Unit |
copper/aluminum |
15*160mm |
350KN |
|
Bending Unit |
copper/aluminum |
15*160mm |
350KN |
Punching Unit
Draw and replace dies rapidly without tools; capable of completing the processes of punching round holes, long round holes, square holes and double holes, embossing, pressing copper rods, shearing copper rods, etc.